PEP ARAB’s SM-ADC1 is a high-resolution and optoisolated A/D converter module that supports current or voltage inputs.
The six differential inputs offer high distortion immunity that is important for industrial environments.
An on-board EEPROM stores unique calibration and gain/offset data required by the signal converter.

► 6 differential & optoisolated inputs
► ±10V DC or 0..20mA input range
► 12-bit ADC with 1-bit non-linearity
► 50µs conversion time
► Overvoltage protection
► 2 user configurable LEDs




Function :6 differential channels
Input Range :±10V DC (0..20mA)
A/D converter:
Resolution : 12-bit with 1-bit non-linearity
Repeating Accuracy : 10-bit
Input Impedance : 450kW (voltage version)

124W (current version)

Input Filter : 10kHz
Conversion Time :  50µs @ 1MHz (per channel)
Overvoltage protection:
Continuous : ±35V DC
Isolation : 1.0 kV optoisolated from the system
Front Panel : 2 red LEDs (user configurable)
EEPROM : 256 Byte Serial EEPROM for calibration data
Weight : 70g
Power Cons. : 350mW min (LEDs OFF), 450mW max  (LEDs ON)
Temp. Ranges : 0ºC to +70ºC

-40ºC to +85ºC (opt. E2)

-55ºC to +85ºC (storage)

Humidity : 5% to 95% non-condensing