Products | IO Modules | SM-PT100
|
SM-PT100
SMART-Module with 4 Optoisolated
PT100 Inputs
The SM-PT100 is used for 2, 3 or 4-wire temperature measurement using PT100 sensors driven by an on-board constant current source.
Capable of connecting sensors measuring temperatures between -200ºC and +850ºC, the SMTHERM uses a fast 16-bit delta-sigma A/D converter that ensures an absolute measurement accuracy of 0.2ºC.
► 2, 3 or 4-wire PT100 sensor inputs
► Open sensor detection
► Self calibration (on-board EEPROM)
► Overvoltage protection
► 2 user configurable LEDs
|
|
|
  
|
Technical Specifications
|
Input
|
|
Function
|
: PT100 temperature measurement with 4-wire
connection supported and open sensor detection
|
|
Temp. Range
|
: -200ºC to +850ºC
|
|
Temp. Drift
|
: 1 LSB/ºC (not compensated)
Conversion Time: Typ. 125ms, max. 500ms (depending on filter settings)
|
|
Input Impedance
|
: 10 MW(min.)
|
|
Resolution
|
: 16-Bit
|
|
Absolute Accuracy
|
: ± 0.2ºC (sensor errors excluded)
|
|
Calibration
|
: Self calibration
|
|
Linearisation
|
: By software
|
|
Overvoltage Protection
|
|
Continuous
|
: ± 25V (power connected)
± 35V (power disconnected)
|
|
Common
|
|
Isolation
|
: 1.0 kV optoisolated from the system
|
|
EEPROM
|
: 256 Byte serial EEPROM for calibration data
|
|
Front Panel
|
: 2 Red LEDs (user configurable)
|
|
Weight
|
: 40g
|
|
Power Cons.
|
: 350mW (min.), 450mW (max.)
|
|
Temp. Ranges
|
: 0ºC to +70ºC
-40ºC to +85ºC (opt. E2)
-55ºC to +85ºC (storage)
|
|
Humidity
|
: 5% to 95% non-condensing
|
