Products | IO Modules | SM-DOUT1
|
SM-DOUT1
SMART-Module with 8 Optoisolated
24V DC Digital Outputs
The SM-DOUT1 is a versatile digital output module that simplifies actuator connection.
With a duty cycle of 1:1, it can fully load all channels simultaneously and can switch at a maximum frequency of 1 kHz.
In addition, inductive loads may be driven without damage to the module.
► 8 optoisolated 24V DC digital outputs
► 2 independent groups
► Common Vcc (high-side switch)
► 500mA continuous output current
► Overvoltage protection
► Inductive load protection
► LED channel status indication
|
|
|
  
|
Technical Specifications
|
Output
|
|
Function
|
: 8 digital channels
|
|
Organisation
|
: 2 independent groups with respect to high-side switches (common Vcc)
|
|
Output Voltage
|
: 24V DC ± 10%
|
|
Output Current
|
: 500 mA (continuous) per channel
|
|
Output Frequency
|
: 1 kHz (square wave)
|
|
Switch ON Delay
|
: 3µs (resistive at 24V DC)
|
|
Switch OFF Delay
|
: 130µs (resistive at 24V DC)
|
|
Output ‘ON’
|
: Internal logical ‘0’
|
|
Output ‘OFF’
|
: Internal logical ‘1’
|
|
After Reset
|
: All outputs OFF
|
|
Overvoltage Protection
|
|
Rate
|
: 90V/10µs
|
|
Continuous
|
: 35V DC
|
|
Common
|
|
Inductive Load
|
: Clamp diode protected
|
|
Isolation
|
: 2.5 kV optoisolated from the system
|
|
Front Panel
|
: 8 yellow LEDs (ON when the output is ON)
|
|
Weight
|
: 70g
|
|
Power Cons.
|
: 5mW (min.), 270mW (max.)
|
|
Temp. Ranges
|
: 0ºC to +70ºC
-40ºC to +85ºC (opt. E2)
-55ºC to +85ºC (storage)
|
|
Humidity
|
: 5% to 95% non-condensing
|
