PEParab

     PEP ARAB News...PEP ARAB start modernization of control system project at Suez Canal Authority...PEP ARAB awarded a contract for supply SCADA system for Nile River [Telemetry System]...PEP ARAB finalized SCADA System project for Dakahlia Water Company...PEP ARAB won a project for sypply SCADA system of Misr Italy Factories...

SMART I/O Modules

Analog Modules

 SM-ADC1    

SM-ADC1 is a high-resolution and opt isolated A/D converter module that supports current or voltage inputs. The six differential inputs offer high distortion immunity that is important for industrial environments. An on-board EEPROM stores unique calibration and gain/offset data required by the signal converter.


     SM-ADC
 SM-DAC1    

SM-DAC1, available in several different configurations, handles 12-bit DAC tasks with an exceptional repeating accuracy. The short conversion time of 75μsec (per channel) transforms the SM-DAC1 into a powerful digital/ analog system. Unique calibration and gain/offset data are stored in an on-board serial EEPROM.


   SM-DAC
 SM-THERM    

SM-THERM supports up to four groups of R, S, B, J, T, E or K thermo element sensors together with a cold-junction for extremely accurate temperature measurements. Designed around a fast 16-bit delta-sigma A/D converter, the SM-THERM ensures an absolute measurement accuracy of 0.2ºC over the complete operating temperature range of -210ºC to +1820ºC.


   SM-THERM
 SM-PT100    

The SM-PT100 is used for 2, 3 or 4-wire temperature measurement using PT100 sensors driven by an on-board constant current source. Capable of connecting sensors measuring temperatures between -200ºC and +850ºC, the SMTHERM uses a fast 16-bit delta-sigma A/D converter that ensures an absolute measurement accuracy of 0.2ºC.


   SM-PT100

 

Digital Modules

 SM-DIN1   
 

The SM-DIN1 is a general purpose digital input module. Designed with 6 independent input groups, the module offers a high level of flexibility when connecting process signals with different potential groups.


 

 

     
 SM-DIN1
 SM-DOUT1    

The SM-DOUT1 is a versatile digital output module that simplifies actuator connection. With a duty cycle of 1:1, it can fully load all channels simultaneously and can switch at a maximum frequency of 1 kHz. In addition, inductive loads may be driven without damage to the module.

 

 

   SM-DOUT1
 SM2-DC24V1    

The SM2-DC24V1 is an 18V to 36V / 10W DC/DC converter purposefully designed to suit a fully loaded SMART2 system and features additional digital outputs, continuous short circuit protection and extended operating temperature capabilities.

   SM-PSU
PEParab Certificates